(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: [email protected]
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
MISUMI Spline Shaft
|
Nut Type
|
|
|---|---|
Brand |
|
| CAD |
|
| Days to Ship |
|
30 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Standard Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent 1 ～ 2 Days to Ship: Số ngày giao hàng: 8 Day(s) or more 
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Tapped
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Tapped Tapped Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Standard Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, Both Ends Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Tapped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Stepped Tapped
MISUMI
ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 8 ～ 30.8 Solid Standard 25 ～ 80 16 ～ 47 Standard Standard Grade Stepped and Tapped Stepped and Tapped Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
MISUMI
ball spline with a female thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Tapped Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyMiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Standard Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, Both Ends Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Stepped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Straight Nut, Both Ends Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Tapped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Stepped and Threaded
MISUMI
A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped and Threaded Stepped and Threaded Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball Splines - One End Stepped and Threaded
MISUMI
ball spline with a stepped male thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped and Threaded Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Ball Splines - One End Stepped
MISUMI
A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped Standard Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines-Hollow Type, Round Flanged
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 13 ～ 30 Hollow - - - - - Standard Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - One End Stepped and Threaded, One End Tapped
MISUMI
A ball spline with a stepped male thread on one end and a female thread on the other end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design. A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped and Threaded Tapped Middle Torque SUS440C Equivalent / SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Double Stepped and Threaded
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
Ball Splines - Both Ends Stepped
MISUMI
ball spline with stepped edges on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Key Provided Type / Flanged Type 6 ～ 30.8 Solid Standard 25 ～ 80 14 ～ 47 Standard Standard Grade Stepped Stepped Middle Torque SCM415 Equivalent / SUS440C Equivalent - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Tapped Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Straight Nut, Both Ends Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Stepped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splined-Hollow Type, Key Provided Straight Nut
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 13 ～ 30 Hollow - - - - - Standard Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Double Stepped and Threaded
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines-Hollow Type, Round Flanged, Both End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 16 ～ 30 Hollow - - - - - Tapped Tapped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splined-Hollow Type, Key Provided Straight Nut, One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 16 ～ 30 Hollow - - - - - Tapped Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Round Flanged, One End Double Stepped and Threaded / One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Tapped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splined-Hollow Type, Key Provided Straight Nut, Both Ends Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 16 ～ 30 Hollow - - - - - Tapped Tapped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines-Hollow Type, Round Flanged, One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 16 ～ 30 Hollow - - - - - Tapped Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
You can add up to 6 items per a category to the compare list.
High Rigidity Needle Guide Sets
MISUMI
"The product is structured to arrange the high accuracy needle roller between the square shaft and bushing and thereby, achieves high accuracy, high load durability and high torque transmission."
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) - 6 ～ 16 Polygonal - - - - - - - - - - Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Stepped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped Standard - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
-
Economy series
You can add up to 6 items per a category to the compare list.
MiSUMi EconomyBall Splines Key Provided Straight Nut, One End Double Stepped and Threaded / One End Tapped
MiSUMi EconomyMISUMI
Nut Type Spline Shaft Outer Dia. D(Ø) Type Nut Length Nut Overall Length L1(mm) Nut Outer Dia. D1(Ø) Preload Accuracy Grade End Shape (Left) End Shape (Right) Torque Shaft material Number of Nuts(pc(s).) Flanged Type 8 ～ 30 Solid - - - - - Stepped and Threaded Tapped - SUJ2 Equivalent - Days to Ship: Số ngày giao hàng: 13 Day(s)
13 Day(s)
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| CADCAD |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Nut Type |
| Spline Shaft Outer Dia. D(Ø) |
| Type |
| Nut Length |
| Nut Overall Length L1(mm) |
| Nut Outer Dia. D1(Ø) |
| Preload |
| Accuracy Grade |
| End Shape (Left) |
| End Shape (Right) |
| Torque |
| Shaft material |
| Number of Nuts(pc(s).) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | |
| BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product SeriesDòng sản phẩm | Ball Splines Round Flanged, One End Double Stepped and Threaded | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded | Ball Splined-Hollow Type, Key Provided Straight Nut, One End Tapped | Ball Splines Round Flanged, One End Double Stepped and Threaded / One End Tapped | Ball Splined-Hollow Type, Key Provided Straight Nut, Both Ends Tapped | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded / One End Tapped | ||||||||||||||||||||||||
| CADCAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Days to ShipSố ngày giao hàng | 8 Day(s) or more | 8 Day(s) or more | 13 Day(s) | 13 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 13 Day(s) | 13 Day(s) | 13 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 13 Day(s) | 13 Day(s) | 8 Day(s) or more | 13 Day(s) | 13 Day(s) | 8 Day(s) or more | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 8 Day(s) or more | 13 Day(s) | 13 Day(s) |
| SpecificationsĐặc điểm kĩ thuật | ||||||||||||||||||||||||||||||
| Nut Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | - | Flanged Type | Flanged Type |
| Spline Shaft Outer Dia. D(Ø) | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 6 ～ 30.8 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 13 ～ 30 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 13 ～ 30 | 8 ～ 30 | 16 ～ 30 | 16 ～ 30 | 8 ～ 30 | 16 ～ 30 | 16 ～ 30 | 6 ～ 16 | 8 ～ 30 | 8 ～ 30 |
| Type | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Hollow | Solid | Solid | Solid | Solid | Solid | Solid | Hollow | Solid | Hollow | Hollow | Solid | Hollow | Hollow | Polygonal | Solid | Solid |
| Nut Length | Standard | Standard | - | - | Standard | Standard | - | - | - | Standard | Standard | Standard | - | - | Standard | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - |
| Nut Overall Length L1(mm) | 25 ～ 80 | 25 ～ 80 | - | - | 25 ～ 80 | 25 ～ 80 | - | - | - | 25 ～ 80 | 25 ～ 80 | 25 ～ 80 | - | - | 25 ～ 80 | - | - | 25 ～ 80 | - | - | - | - | - | - | - | - | - | - | - | - |
| Nut Outer Dia. D1(Ø) | 14 ～ 47 | 14 ～ 47 | - | - | 16 ～ 47 | 14 ～ 47 | - | - | - | 14 ～ 47 | 14 ～ 47 | 14 ～ 47 | - | - | 14 ～ 47 | - | - | 14 ～ 47 | - | - | - | - | - | - | - | - | - | - | - | - |
| Preload | Standard | Standard | - | - | Standard | Standard | - | - | - | Standard | Standard | Standard | - | - | Standard | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - |
| Accuracy Grade | Standard Grade | Standard Grade | - | - | Standard Grade | Standard Grade | - | - | - | Standard Grade | Standard Grade | Standard Grade | - | - | Standard Grade | - | - | Standard Grade | - | - | - | - | - | - | - | - | - | - | - | - |
| End Shape (Left) | Standard | Tapped | Standard | Tapped | Stepped and Tapped | Tapped | Standard | Stepped | Tapped | Stepped and Threaded | Stepped and Threaded | Stepped | Tapped | Standard | Stepped and Threaded | Stepped | Stepped and Threaded | Stepped | Tapped | Stepped | Standard | Stepped and Threaded | Tapped | Tapped | Stepped and Threaded | Tapped | Tapped | - | Stepped | Stepped and Threaded |
| End Shape (Right) | Standard | Tapped | Standard | Tapped | Stepped and Tapped | Standard | Standard | Stepped | Tapped | Stepped and Threaded | Standard | Standard | Standard | Standard | Tapped | Standard | Standard | Stepped | Standard | Stepped | Standard | Standard | Tapped | Standard | Tapped | Tapped | Standard | - | Standard | Tapped |
| Torque | Middle Torque | Middle Torque | - | - | Middle Torque | Middle Torque | - | - | - | Middle Torque | Middle Torque | Middle Torque | - | - | Middle Torque | - | - | Middle Torque | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft material | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUS440C Equivalent / SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SCM415 Equivalent / SUS440C Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | - | SUJ2 Equivalent | SUJ2 Equivalent |
| Number of Nuts(pc(s).) | 1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Spline Shaft Outer Dia. D(Ø)
-
Type
-
Nut Length
-
Nut Overall Length L1(mm)
-
Nut Outer Dia. D1(Ø)
-
Preload
-
Accuracy Grade
-
End Shape (Left)
-
End Shape (Right)
-
Torque
- High Torque
- Middle Torque
-
Shaft material
- SCM415 Equivalent
- SUJ2
- SUS440C Equivalent
- SUS304
- SUJ2 Equivalent
-
Number of Nuts(pc(s).)
Application example related to this categoryVí dụ ứng dụng liên quan đến danh mục này
Related Categories to Spline ShaftDanh mục liên quan đến Spline Shaft
FAQ Spline Shaft
- Question: What are spline shafts and their primary function in linear motion?
- Answer: Spline shafts are cylindrical rods with ridges or teeth along their length, known as splines. Their primary function in linear motion is to convert rotational motion into smooth and precise linear movement. These splines engage with complementary components to transmit torque efficiently, ensuring controlled motion without slipping or backlash. Spline shafts are crucial in various machinery applications where accurate linear motion is required, such as moving heavy loads or guiding tools with precision, providing reliable and efficient motion control.
- Question: Can you explain the key characteristics of square splines?
- Answer: Square splines feature square-shaped ridges and slots, offering efficient torque transmission and precise alignment. Their design allows for high torque capacity and compatibility with various mating components. Due to their simplicity of manufacture, they are cost-effective for many applications. Additionally, the even distribution of wear along the mating surfaces enhances durability. Square splines are widely used in industrial and mechanical systems where accurate motion control and reliable torque transmission are essential.
- Question: What role do spline shafts play in automotive transmissions?
- Answer: Spline shafts are essential in automotive transmissions for transferring power from the engine to the wheels. They connect parts like the clutch and gears, ensuring smooth power transmission. By enabling the engine's rotational motion to move the wheels with precision, they allow the vehicle to accelerate, decelerate, and shift gears seamlessly. Essentially, spline shafts ensure that your car moves smoothly and efficiently, contributing to its overall performance and driving experience.
- Question: What factors should be considered when choosing a spline shaft?
- Answer: When selecting a spline shaft, it's important to consider factors like the application's torque, speed, and precision requirements. Choose a spline profile and dimensions that match mating components to ensure efficient power transmission. Material selection is key for strength and corrosion resistance. The surface finish impacts durability, while manufacturing methods and costs should be evaluated. Supplier reliability is also crucial. By carefully considering these factors, you can choose a spline shaft that meets your application's needs effectively, ensuring optimal performance and longevity.
- Question: What materials are commonly used for manufacturing spline shafts?
- Answer: Spline shafts are commonly made from materials like steel, aluminum, brass, bronze, titanium, and plastics. Steel offers strength and durability, while aluminum is lightweight. Brass and bronze provide corrosion resistance. Titanium is strong and corrosion-resistant, ideal for demanding environments. Plastics offer benefits like low friction and electrical insulation. The choice depends on factors such as strength, corrosion resistance, weight, and cost.
- Question: What are the maintenance requirements for spline shafts?
- Answer: Maintaining spline shafts involves regular checks for wear, damage, and corrosion. Keep them lubricated to reduce friction and ensure smooth operation. Clean them regularly to prevent dirt buildup. Properly align mating components to avoid unnecessary stress on the shafts. Promptly replace any worn or damaged shafts to prevent further issues. Protect spline shafts from harsh environments and store them correctly when not in use. Following these steps will help ensure the longevity and efficient performance of spline shafts in machinery and equipment.
- Question: How do nut types of influence spline shaft functionality?
- Answer: The type of nut used can significantly affect spline shaft functionality. Slotted nuts provide anti-rotation, ensuring the nut and shaft move together for enhanced torque transmission. Hex nuts offer stability with six sides but lack anti-rotation features. Lock nuts prevent unintentional loosening, employing mechanisms like nylon inserts or serrations. Flange nuts distribute load over a wider area with a built-in washer-like flange. Self-locking nuts have integrated locking features to prevent loosening due to vibrations or external forces. Each type suits specific applications based on torque requirements, environmental conditions, and space constraints.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy